Vision 4 LED Front Light Hope
Search   Category   Products   Sorting     

Products

Tech V2 Disc Brakes
Tech X2 Disc Brakes
Tech M4 Disc Brakes
Mini Trial Disc Brakes
Mini X2 PINK Brakes
Mini X2 Pro Brakes
Current Disc Brake Spares
Current Rotors
Pro ll Hubs
Pro lll Non Disc Hubs
Current Hub Spares
Bottom Brackets
Wheelsets
Lights
Light Spares
Stems
Headsets
Headset Spares
Quick release
Seat Clamp
Hope Doctors
Brake Mounts
Brake Pads
Archive Rotors
Old Disc Brake Spares
Old Hub Spares
Clothes and Merchandise
Tool
Complete Kits
..
....
.....

Category

Cross country
Free Ride
Enduro
Down Hill
Trial
Others

Powered By

Power By ID
GraffX design

Vision 4 LED Front Light - Hope


Information

Description : The all NEW 4 LED boasts some serious output! This
impressive new light offers nearly twice the lumen output
of it’s HID predecessor.
The 4 high powered LED’s push out 960 lumens on max
power! Combine this with over 2 hours of burntime and it’s
a winning combination.
The NEW! CNC machined lamp body mounts to the NEW!
reinforced nylon handlebar bracket, which fit’s both
standard and OS bars with the clever use of removable
rubber plugs. The bracket also allows for lateral adjustment
of the lamp whilst riding.
The 7.4v Li-ion battery pack is the same as the 2 LED’s ‘Epic’
version - with it’s 4 cells giving 5200mAh. The battery has
built in charge, discharge and short circuit protection. The
connectors are fully sealed and totally waterproof (IP67).
The light has a simple on/off/mode switch on the back. This
has a new cycle programme which turns the light on in ‘low’
mode and cycles through to the higher settings. This gives
better control of the light in tricky situations when more
light is needed quickly.
I
n tests the 7.4v Li-ion battery wil last for upto 35hrs on low,
and 2h 15min* on max, with the intelligent charger returning
that in just 6 hours. The PVC case is small enough to fit
under most stems, top tube junctions or slip into a
hydration pack or jersey pocket.
The 4 LED model now utilises ‘thermal throttling’ techniques
to increase the longevity of the LEDs and prevent damage
to the electrical circuit due to overheating. This works by
monitoring the temperature of the Aluminium heat sink
and restricting the power when it reaches a critical level,
thereby keeping the casing at an acceptable temperature
for handling while providing extended battery burn times
by reducing the amount of energy lost through heat.
As well as the universal handlebar clamp, a NEW! reinforced
nylon helmet mount is also included, as well as ample velcro
fastenings.
This light is perfect for Endurance events, 12/24hr racing and
night riding alike. It gives more light than you’ve ever had
before with sensible run times and a low system weight.
USE: When it goes dark! Really dark!

Vision 4 LED Front Light Hope


Print this page Click on the image to enlarge

Mailing List

Send us your email


Information

About Us
Technical
Contact Us
International Contact

Find Dealer

Click here for a list of Tech Shops